+55 16 981276516 / + 55 11 31972522
sales@hensistemas.com
Menu
Categories
- Anemometer
- Application
- Battery Tester
- DataLoggers
- AC Current/Voltage
- Acceleration
- Condutividade/Salinidade
- DC Current/Voltage
- Dissolved Oxygen
- Entrada de Pulso
- Evapotranspiration
- Gás
- Humidade do solo
- Humidade Relativa
- Kilowatt (kWh/kW)
- Leaf Wetness
- Luz/Radiaçao Solar/PAR
- Nivel de Agua
- pH
- Pressure
- Rainfall
- Temperatura da água
- Temperature
- Tilt
- VOC
- Water Flow
- Wind
- Detector de gás
- Endoscope
- GPS Trackers
- IoT Solutions
- Lascar Electronics
- Laser rangefinder
- Manometers
- Medidor de temperatura e umidade
- Microwave detector
- Noise meter
- PainelPilot Display
- Portable Resistance Tester
- Tachometer
- Termômetro industrial
- Thermal Imager
- Thickness gauge
- Uncategorized
- Warehouse
- Weather
- Wireless Sensors
Aranet CO2 and Temperature Sensor
Aranet wireless, battery-powered carbon dioxide sensors have IP67 protection class – they can be placed in harsh environmental conditions. Sensors perform highly accurate measurements as well as they are flexible and easy to setup.
Aranet Temperature and Relative Humidity IP68 Wire...
The wireless sensor measures temperature and relative humidity. The IP class 68 hermetic enclosure of the sensor ensures that no excessive moisture or dust particles can alter the readings, ensuring constant and reliable data monitoring. The sensor can be placed in harsh environmental conditions and withstand excessive humidity.
CR310-WiFi Datalogger with Ethernet
The CR310 is a multi-purpose, compact, low-cost measurement and control datalogger that includes an integrated 10/100 Ethernet port and removable terminal connectors. This entry-level datalogger, with its rich instruction set, can measure most hydrological, meteorological, environmental, and industrial sensors. It will concentrate data, making it available over varied networks and deliver it using your preferred protocol. The CR310 also performs automated on-site or remote decision making for control and M2M communications. The CR310 is ideal for small applications requiring long-term, remote monitoring and control.
EasyLog Event, Count and State Data Logger with US...
This standalone data logger can record up to 32,510 events, state changes and count events. Fast logging rates allow event capturing at speeds of up to four times per second and state changes at speeds of up to two times per second. Event counting can operate at speeds of up to 100 times per second (when the LED's are turned off). The data logger is supplied with a cap featuring a pair of screw terminals and measurement leads terminating in crocodile clips. Easily set up the logger and view downloaded data by plugging the unit into a PC’s USB port and using the free EasyLog software provided. Data can then be graphed, printed and exported to other applications for detailed analysis. Supplied with ½AA battery and wall mount clip.
EasyLog WiFi Thermistor Probe Data Logger
R$990,00
This WiFi-enabled temperature data logging sensor can remotely monitor an environment over a -40 to 125°C (-40 to 257°F) measurement range. Data is uploaded periodically using a standard WiFi network to the EasyLog Cloud or a single host PC. Supplied with thermistor probe and mounting clip.
EasyLog Cloud gives access to each data logger, and data collected from any internet-enabled device. Change data logger settings remotely, receive email alerts of alarm conditions, link sensors from multiple sites into one account and assign multiple user privileges.
The device will store data internally if it loses WiFi connection and automatically uploads it to the Cloud once reconnected.
Use the EasyLog Cloud Apps for Android and Apple to easily setup your device and access your data anytime, anywhere.
EasyLog Wireless Thermistor Data Logger
R$990,00
The EL-MOTE-TP is a Cloud-enabled, wireless data logger, designed to monitor temperature in a large range of indoor and outdoor applications. EasyLog Cloud harnesses the power of IoT to automate data logging and alert notifications - perfect for both compact systems with just a few sensor requirements to corporate solutions with thousands of devices around the globe.
HS28N01-TR3 Soil Moisture and temperature Profile ...
The Multi-segment soil moisture and temperature profiling probe is a sensor based on the principle of dielectric constant. It can dynamically observe the soil moisture content and temperature status at different levels. This detector can detect the temperature and humidity status of 3 segments of soil and the temperature and humidity status of 5 segments at most.
The product uses standard Modbus-RTU485 communication, which can communicate up to 2000 meters.
The device shell is made of PVC plastic tube, which can penetrate the high-frequency detection wave of nearly 1G Hz, and will not be affected by salt ions in the soil. Agricultural activities such as fertilizers, pesticides, and irrigation will not affect the measurement results.
STR-21G-S2 Solar Monitoring Systems
EKO’s new solar Monitoring System, the STR-21G-S2, is a dedicated sensor system to perform the most accurate solar radiation measurements of the three solar radiation components (Direct, Diffuse and Global). It can be easily integrated to any DAQ system, which has multiple analog or digital inputs. With the standard sun-position sensor and GPS receiver built inside the sun tracker the system, set-up will be quick and easy.
DS1923-F5 Hygrochron Temp/Humidity Logger
The DS1923 temperature/humidity logger iButton® is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a userdefined delay or after a temperature alarm. Access to the memory and control functions can be passwordprotected.
HS14GS-SDI12 SDI 12 Telemetry Data Logger
Delivering data has never been as easy as the RTU Rev 2.1 and 2.2 device
IP-68 rated enclosure and connector will take care of the environmental conditions.
Compatible with nearly all manufactures’ SDI-12 sensors making this device suitable for a variant of applications.
kit Ultrasonic Weather Station with communication ...
Ultrasonic Weather Station includes Data Logger with GSM/GPRS communication that provides instant access to site-specific environmental data anywhere, anytime via the Internet.
The ultrasonic weather station offers accurate and reliable performance, even in the harshest outdoor climates.
Easy deployment
This compact ultrasonic weather station with no moving parts
24/7 data Access
HS142 Weather Station Data Logger
The data logger supports the following measurements: Barometric Pressure, DC Voltage, Dew Point, Leaf Wetness, Light Intensity, PAR, Power Factor (PF), Pulse Input, Rainfall, Relative Humidity, Soil Moisture, Solar Radiation, Temperature, Volt-Amp Reactive, Volt-Amp Reactive hour, 4-20mA, Amp Hour (Ah), Kilowatt Hours (kWh), Volt-Amps (VA), Water Flow, Watt Hours (Wh), Watts (W) and Wind
HS14DP2E weather display is powered by 100~240V AC~50/60Hz, display all meteorological parameters including wind speed, wind direction, temperature, humidity, barometric pressure, precipitation type, rain intensity, PM2.5, visibility, Luminance, Solar Radiation, Road State, Road Temperature. HS14DP2E display has one way RS485 input and one way RS485 output MODBUS-RTU protocol.
HS14EMD Ultrasonic Weather Station
HS14EMD6E is a weather station integrated with multiple high accuracy sensors. The wind sensor is based on our ultrasonic technology, is of a robust, high strength construction designed to withstand installation and use with no fear of the damage commonly experienced with more fragile cups/vane weather station.
HS14IRS2E Road Temperature Sensor
HS14IRS2E is a compact infrared temperature sensor. The optical analysis system is sited in a compact aluminium shell. An 90° adjustable mounting bracket allows an easy installation. It’s designed for industrial, outdoor 7/24 monitoring.
HS14IRS2E is compose of thermopile and a thermistor and working based a basic principle that All objects with a temperature above absolute zero emit electromagnetic radiation. The wavelengths and intensity of radiation emitted are related to the temperature of the object.
HS14WDC2E Ultrasonic Anemometer
The HS14WDC2E Ultrasonic Anemometer is designed to simultaneously measure two-dimensional horizontal wind speed and direction components based on the TOF (time of flight) principle of the ultrasonic sound wave. The low power consumption chip reduces its power consumption to 0.2W. The use of ABS housing allows a lighter and more robust structure.